Compaq ML370 Rebuild

[HenryV]

I have started a rebuild of an older server running Windows NT4.0. I have used the smartstart CD and am at the point were it is asking for the "Compaq Management CD 4.80". I can not find this CD on site. It is at the point of loading pre-installation interviews. I have downloaded a couple of files that I thought was the equiv. of this managemen CD but I guess not. I would like to get the CD or make the correct CD so I don't have to abort this installation and configuration.

[Gordon Leonard]

Well is this link works...(Try cut and paste if not).

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=345557&prodNameId=344318&swEnvOID=181&swLang=8&mode=2&taskId=135&swItem=MTX-597d7cb6b45d493285e27c1412

You want SmartStart 5.50.

[HenryV]

Thanks for your help with this. I have solved the problem by downloading the erase utility. Once I erased the existing configuration the Smartstart CD did provide me the uilities to configure the array controller, the two redundant nic cards and perform the Windows installation.

Thanks again for responding

Henry