RDP 3.80 Server 2008 Problem with NIC Team

[M Birchall]

Found an issue with RDP 3.80 with Server 2008. I have tried this on countless DL460c Blades.

All works fine and pushing applications to the servers. Except when I team the NIC's using the HP NIC utility and once restarted the RDP box cannot talk to the client. I have turned off the firewall of the server 2008 box, reinstalled the client.

I have tried building a box from scratch, then teaming the NIC's, then install the client. All works ok till I restart the box which it then cannot talk to the altiris server.

Any Ideas or a soluton to this problem? I need a solution to this problem.

[karstenz]

Logged a call to HP about a month ago on this one.
At the time, the response was that it was a problem in the RDP client and is unlikely to fixed until the next release (this may have changed by now).

[M Birchall]

Cheers for the reply. Can you let us know if they create a fix for this issue before the next HPRDP release.

[ThomasVu]

Having the same problem.

A: Is there a known workaround?
B: Any thoughts when the next RDP version will be released or does this depend on the next altiris DS release?

[Kase]

If correct, this is a pretty big issue. I am working on our 2008 builds on c-class blades (46x,480,68x). I will post my findings on this issue.

KarstenZ: Can you post the specifics of Support's explanation?

[Gordon Leonard]

HP is aware of the issue and working with Symantec/Altiris on a fix. Currently, the fix is targeted to be in RDP 3.82, scheduled for November.

[Kase]

I never did have the issue described by the OP. All of our RDP 3.80 scripted 2008 installs work correctly across bl46xs, bl480s and bl68xs. I did have one isolated issue where the Altiris client install failed during first boot into the OS. This only happened once and has not happened again.