440ar array missing from HP Storage Administrator on DL360 G9

[johncarrjr]

Built server with Win2012.  Did Intelligent Provisioning which put the drivers on, but that did not put on the Windows software for the HP Storage Administrator.  We installed that post OS install, and Insight Manager sees the Array Controller, but the HP HP Storage Administrator doesn't.  It says, "No controllers detected".

The drives are configured using the Storage Administrator available in Intelligent Provisioning, prior to the OS being installed.  6 drives, RAID 6, 2TB volume. 

Server boots in Legacy mode.

Obviously, if we had an issue, we could reboot and press F10 to go into the Storage Administrator, but it's nice to be able to go into Storage Administrator from Windows to check for/fix problems without having to take the server down.

[johncarrjr]

I found my own answer in this post:

http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/How-to-check-if-hardware-RAID-is-configured/td-p/6802613#.ViZI5jZdE5g

I downloaded the latest HP SSA from the link in that post.  All is good now.