776 ready for recovery is queued for rebuilding

[Najif]

Dear 

i have server HP ProLiant DL180 G6 with Smart Array P212 

i used raid 1 for 2 hdds 

fisrt hdd sas 2tb as 3 partitions and in the first partition the windows was installed and we have another 2tb to mirror using raid 1 the first hdd

also we have sas ssd 256gb raid 1 with another one 

all in working gd but i have problem that in the partition where the windows installed the array always say that Ready for Recovery (is queued for rebuilding) but doesnt rebuild

all the others partitions ( logical drive) rebuild normaly and work fine

what should i do???

i upload and attached the report from array

hope to get help

Thank you

[Varun3]

Hi Najif,

As per the above details, i see that the first raid 1 partition where the windows installed in the
array always say that Ready for Recovery (is queued for rebuilding) but doesnt rebuild.
Could be because of the following reason.

There could be read or write errors on these hard drive's which is part of raid1 group due which the rebuild would be pending.

If there no read and write errors on the hard drive's in this Raid group then you take data backup and update the firmware on the controller.

You may contact support if you need any assistance with further diagnosis of the issue.

Thanks
HPE support

[Najif]

dear

how can i know and test if there  read and write errors on the hard drive???

Thank you