ProLiant Servers (ML,DL,SL)
1820499 Members
2387 Online
109625 Solutions
New Discussion юеВ

Base System Driver - DL360 Gen 9

 
SOLVED
Go to solution
NINSMART
New Member

Base System Driver - DL360 Gen 9

Hi

I have 1 Base System Device Driver left after installing chip identifier and iLO drivers.
Running MS Server 2019.

PCI\VEN_103C&DEV_3306&SUBSYS_3381103C&REV_06
PCI\VEN_103C&DEV_3306&SUBSYS_3381103C
PCI\VEN_103C&DEV_3306&CC_088000
PCI\VEN_103C&DEV_3306&CC_0880

2 REPLIES 2
thutchings
HPE Pro

Re: Base System Driver - DL360 Gen 9

Hello,

That device ID seems to correspond to a function associated with the iLO. Have you loaded both the management controller driver and the channel interface driver for the iLO 4?

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_e20968c891b444c6b6de68a734&swEnvOid=2000152#tab-history

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_58284ae214af415c9547f8c8dd&swEnvOid=2000152#tab-history

I would load the channel interface (CHIF) driver and see if that corrects the problem.


Regards



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Sunitha_Mod
Moderator
Solution

Re: Base System Driver - DL360 Gen 9

Hello @NINSMART,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.



Thanks,
Sunitha G
I'm an HPE employee.
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo