Built-in iLO Credentials for ProLiant DL360 Server

[Nama_Shivaya]

Currently, the ProLiant DL360 server has no pull tabs containing information about iLO username and password. I want to know the built-in ilo username and password of the Proliant DL360 server, so I need assistance with this.

[Cali]

Usually, it is also on the top right:

Cali

[TVVJ]

Hello,

If you need assistance even after the above reply by "Cali", Please provide the generation of the server such as Gen10 or Gen9 etc., so that the relevant user guide could be provided by you to identify the location of the its asset tag / serial number pull tab which has this information printed on it.

Regards,

[Nama_Shivaya]

Sorry for the earlier confusion. Let me clarify the issue. Currently, I have the motherboard of a ProLiant DL380 Gen11 server without its full assembly. For testing purposes, I would like to know the default password for iLO. However, the challenge is that I don't have any frames, pull tabs, or labels to identify the iLO credentials. In this situation, I need assistance in finding the default iLO credentials.

[TVVJ]

Hello,

Please refer to section "iLO default DNS name and user account" of the HPE iLO 6 1.55 User Guide and see if it helps.

Regards,

[Cali]

OK, in this case:

• Power Off the Server
• Set DP1 to Disable iLO Security
• Power On
• Login to iLO without Password needed
• Set a new Password
• Power Off
• Set DP1 to Enbale iLO Security
• 
• 

Cali

[Sunitha_Mod]

Hello @Nama_Shivaya,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.