ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Can't find Intelligent Provisioning - HP proliant DL120 GEN9

 
SOLVED
Go to solution
Highlighted
Occasional Contributor

Can't find Intelligent Provisioning - HP proliant DL120 GEN9

HI,

To reinstall the server HP Proliant DL120 Gen9, according to the manual, says I must enable in BIOS / PLAform configurations (RBSU), Intelligent Provisioning (F10 Prompt). But this option does not exist. How can I install a new operating system?

 

1 REPLY 1
Highlighted
Acclaimed Contributor
Solution

Re: Can't find Intelligent Provisioning - HP proliant DL120 GEN9

If you see F10 for IP during POST you should simply press F10.

If this is not enabled, do the following:

To re-enable Intelligent Provisioning:
1.
Reboot the server and, when prompted, press F9 to access the UEFI System Utilities.
2.
From the System Utilities screen, select System Configuration?BIOS/Platform Configuration
(RBSU)?Server Security?Intelligent Provisioning (F10 Prompt) and press Enter.
3.
Select Enabled

 

You may also consider to recover Intelligent Provisioning:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f6abd3e3803e4b2395eee361c3


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!