HPE Community
ProLiant Servers (ML,DL,SL)
1755348 Members
5828 Online
108831 Solutions
New Discussion

Re: DL145-G2

 
Pierluigi Cecchi
Occasional Contributor

‎07-10-2006 08:33 PM

‎07-10-2006 08:33 PM

DL145-G2

I have replaced a System Board on a DL145-G2, and need to change the serial number.
I've entered the Phoenix Bios Setup, but from the main screen I'm only able to read its field. I've found no way to change it.
All documentations I found on Cybrary tell nothing about it.

Where can I find any indication?

Best regards in advance

Pierluigi Cecchi
0 Kudos
Reply
1 REPLY 1
SPa
Trusted Contributor

‎07-11-2006 12:54 AM

‎07-11-2006 12:54 AM

Re: DL145-G2

You will have to use the utility available on the below link to change the serial number

http://h18007.www1.hp.com/support/files/server/us/download/24218.html?jumpid=reg_R1002_USEN

This will create a diskette that can be used to change the serial number

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.