DL360 G10 - Single RIser and 2 x Dual Port Ethernet cards

[TopRock]

Hello,

Will the following configuration work - willl the bus on the riser support it:

DL360 G10 with a single CPU and single riser

2 x  HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter - in PCI slots or riser

1 x HPE Ethernet 10/25Gb 2-port 640FLR-SFP28 Adapter in FlexLOM port

I'm concerned that the single riser may not have the bandwidth to support the 2 x 25G PCI cards together

Any help would be greatly appreciated

Regards

[Jazz_ISS · Accepted solution]

Hello, 

You may check the "Riser information" here:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00018803en_us#N116A0

Do remember HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter has two dual 10/25Gbe SFP28 ports capable of 50 Gbps bi-directional, 100 Gbps aggregate bi-directional theoretical bandwidth - Requires one x8 PCI (Gen 8) Express slot)

And HPE Ethernet 10/25Gb 2-port 640FLR-SFP28 adapter, FlexibleLOM form-factor has two dual 10/25Gbe SFP28 ports capable of 50 Gbps bi-directional, 100 Gbps aggregate bi-directional theoretical bandwidth - Requires one x8 PCI (Gen 3) Express slot)

Refer Page 10
https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00008159enw

If you still have any query contact HPE Sales team.

[TopRock]

Thank you for coming back ot me Jazz

Your help is greatly appreciated.