DL380 G6 Wont boot Virtual Media

[sup2069]

d3vnul,

I hope you have not paid yet! I was in the same boat as you and I have tried all the things you mentioned, read and studied iLO 2.0 and the server manual. I am using a DL120 G6, I know, different server but perhaps a solution I found that worked for me might work for you?

Follow this link, hopefuly it helps!

http://serverfault.com/questions/288936/hp-dl170-g6-and-lo100-ilo-cant-boot-from-virtual-media

[d3vnul]

I have tested the ports and all that in the past and still not a solution for DL380 G6. I still haven't found a solution for this particular server model so far. I just never install both the internal usb and internal sd card anymore since this is what's causing the problem. Maybe HP should of added a notice " don't use both ports at the same time or your virtual media is screwed " :)). About that , i have a dl380 g6 at home right now ,which works perfectly with just internal usb drive. I will try to get a SD card to test and see if virtual media will still work if i plug the SD card and internal usb at the same time.