ProLiant Servers (ML,DL,SL)
1748165 Members
3754 Online
108758 Solutions
New Discussion

Re: DL380 G9 with non-HPE P100

 
oheli
Occasional Visitor

DL380 G9 with non-HPE P100

Hi,

we are experiencing some problems running a non-HPE P100 GPU in a DL380 G9.
The Server is equiped with the high performace fans, the GPU enabler kit and two 1400W power supplies.

The fan do not speed up (according to the iLo) to more than 15%, even if the GPU is alreay reducing speed by it's high temperatur (82°C and more).

Is there anything more to do, to run non-HPE P100 GPUs in the DL380 G9?

Thanks for your help.

2 REPLIES 2
Suman_1978
HPE Pro

Re: DL380 G9 with non-HPE P100

Hi,

What problems are you having with this configuration?
Any error messages?

I would suggest to update server BIOS and iLO Firmware.

Thank You!

I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //


I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo

Jimmy Vance
HPE Pro

Re: DL380 G9 with non-HPE P100

If the system sensors are not seeing an increased temperature, the fans will not spin up.  You can change the fan settings within RBSU to increased or maximum cooling so the fans always spin faster

 

 

No support by private messages. Please ask the forum!