DL380 Gen 9 all on-board & NIC card ports dead

[rwal]

Seen this issue on 6 DL380 Gen9's so far. Anyone else?

4 boxes running RHEL 6 - after a cold reboot none on the network ports work - on-board or on the FlexLOM card.

HPE had to change both the system board & the FlexLOM card to get the network ports working again.

2 boxes running ESXi 6.5.0 network ports have just stopped working with the same symptoms.

Can see the ports in the BIOS but nothing in the iLO. ESXi sees the ports but no lights on at all.

Pushing for a root cause analysis from HPE - all firmware is SPP2016100

[flynn_thegrid]

ML150 Gen 9 onboard NIC suddenly died after normal reboot. Im trying a PCIe NIC tomorrow to see if that brings the network back up. Bought a HPE FlexFabric 10Gb 2-port 533FLR-T just to find out it's compatible with DL models and not even recognized on ML models. It's the same brand. Well done HP.