DL380P G10 P816 Controller Disks Showing Up As Removable

[tjackson111]

Hello,

I'm having an issue trying to enable Bitlocker in Server 2016 because the RAID disks created are being detected as removeable by the OS. When I look at the disk properties in Disk Management, there is a removable policy under the policy tab. The disk name is "HPE Logical Volume SCSI DIsk Device". I am using the latest SPP (October) so drivers should be up to date. Is it normal for a disk presented from the RAID controller to be treated as removeable? If so, is there a way to change that?

Thanks,
Tim

[denis_b]

Hello @tjackson111!

Sorry for delay with response. Is your question still valid?

Thank you!

[tjackson111]

It is, however HP support has determined this to be a driver bug. Not to be fixed until at least the next SPP.

[denis_b]

@tjackson111

Yes, it's correct. Not sure about future release, because latest SPP was published in March and it contains driver 100.52.1.64 (5 Feb 2018), but it doesn't have fix for reported issue. So we can wait only.