1748246 Members
3499 Online
108760 Solutions
New Discussion

DL380p G8

 
CarlosCurvature
New Member

DL380p G8

Hello ,

I'm facing an issue with a HP DL380p G8 ,  since it's not booting up at all, no screen output,  maybe due to an error related with an amber blinking light  "cr18" on motherboard.

Does anyone knows what is the issue and how to troubleshooting it?

Troubleshooting steps i did;

-clear NVRAM and CMOS battery, by switching jumper num.6 without any results

-hard rested holding the power button for a minute at least.,

 

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: DL380p G8

You should check if you can connect to ILO to get a status.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!