HPE Community
ProLiant Servers (ML,DL,SL)
1753782 Members
7231 Online
108799 Solutions
New Discussion

Re: Firmware update and backup system ROM

 
CFairchild
New Member

‎03-01-2018 06:39 AM

‎03-01-2018 06:39 AM

Firmware update and backup system ROM

I have some Proliant DL380 Gen9 servers and ended up installing the P89 v2.54 firmware before it was pulled off the support site. Everything has been working OK, however now that I am planning the upgrade to the newest released firmware I am wondering about the backup system ROM. Since the last stable version is considered to be P89 v2.52 is there a way for me to have that remain my backup system ROM during the Firmware flash process, or will it be fine to let the process replace that with v2.54? I have never had to boot to redundant ROM, but if the need ever did arise I would hate to boot to a potentially unstable release.

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎03-01-2018 06:59 AM

‎03-01-2018 06:59 AM

Re: Firmware update and backup system ROM

Install the new BIOS 2.56, reboot and install it again, so you have the same new version in both ROMs.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.