ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HOW TO START MY SERVER PROLIANT DL 360 GEN10

 
Highlighted
Occasional Visitor

HOW TO START MY SERVER PROLIANT DL 360 GEN10

hi to everybody i'va a big problem with one of my server,

first I had a proliant dl 360 gen9 hp server which went down.

I buy another server which hp proliant dl360 gen10 ... in which I put my old disc so that it starts and works as usual but it gives me the message of troubleshooting. 

your computer has encountered a problem and needs to restart .we just collect error information and then restart the computer ..enven after this message it doesn't always boot

help me please 

 

2 REPLIES 2
Highlighted
HPE Pro

Re: HOW TO START MY SERVER PROLIANT DL 360 GEN10

Please try checking the boot mode of the old server and ensure that the new server is set to the same boot mode. 

example, if the Gen9 server was set to Legacy boot mode or UEFI boot mode, set the same thing in the Gen10. This is one of the reasons why the OS might not boot when the storage is transferred from one server to another.

Attempt safe mode as well of the OS if the above does not help and also try disk file system check.

I am an HPE employee
Accept or Kudo
Highlighted
Acclaimed Contributor

Re: HOW TO START MY SERVER PROLIANT DL 360 GEN10

Since Gen10 has other hardware components than Gen9 you have missing drivers for sure.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!