HP ACU - No controllers detected (DL380 Gen9)?

[wroot]

I have DL380 Gen9 installed via Provisioning with Windows Server 2012. The RAID array has been created during provisioning. I have also downloaded the latest HP ACU (9.40.12.0) and installed it. But it can't detect controllers (controller is P840).

We have another server (DL380 G8) with Windows Server 2012 and P420I controller. HP ACU detects it. Is P840 not supported by ACU or should i use some other tool to access RAID configuration?

[Jimmy Vance · Accepted solution]

ACU has been replaced by HP SSA. From Intelligent Provisioning run HP SSA, or from RBSU, select setup and the disk controller and launch HP SSA

[wroot]

Thanks. HPE SSA works fine.

[NFL]

Sir,

Is it possbile to manage from windows GUI, or do we need to reboot and login to inteligent provisioning? 

[Jimmy Vance]

You can load SSA in Windows and run from the OS