HPE Community
ProLiant Servers (ML,DL,SL)
1752740 Members
5661 Online
108789 Solutions
New Discussion

Re: HP Gen 10 16G FC Disconnect after reboot

 
JohnEGN
Occasional Contributor

‎08-10-2019 02:25 AM - edited ‎08-10-2019 02:28 AM

‎08-10-2019 02:25 AM - edited ‎08-10-2019 02:28 AM

HP Gen 10 16G FC Disconnect after reboot

There have four servers running ESXI 6.5 U2 or ESXI 6.7 U2 have same issue, we need to reset the FC transceiver and then it will work.

We've perform download SPP and upgrade to latest firmware with same issue as HPE engineer suggested.

Any suggestion?

 

Thanks.

0 Kudos
Reply
1 REPLY 1
DANDKS
HPE Pro

‎08-11-2019 06:41 PM

‎08-11-2019 06:41 PM

Re: HP Gen 10 16G FC Disconnect after reboot

Dear John,

Greetings.

When you mention "reset the FC transceiver", does it mean removing the Transceiver & Inserting it back in the port? Please provide more detailed explanation.

Are the four servers same model? Please share the Model number of the servers.

What is the FC HBA installed on these servers? Please share the Model details.

Please share any support ticket number if you have raised one with HPE Support.

Warm Regards


I am an HPE employee
Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.