ProLiant Servers (ML,DL,SL)
1748129 Members
3520 Online
108758 Solutions
New Discussion

Re: HP ML350 Gen8 3D Sea map sensor - CPU temp BUG !!! (fixed at 40°C or 104F)

 
VBO
Frequent Advisor

HP ML350 Gen8 3D Sea map sensor - CPU temp BUG !!!

Hello,


I see having a BUG in 3d Sea Map for temperature of ML350 Gen8.

A technician open a server, do maintenance and forgot to put back the air flow Plastic repartition plate.

The server get some reboot after 6hours. I turned it off and i open-it.  I see the plastic air flow plate was missing. But the CPU2 was very hot, and CPU 1 not.

I go take a look in temperature sensor data.

Result : both CPU was 40°C temp.

after put back the airflow plate and turned on again 1 day, the CPU temp was SAME !

2 weeks after : SAME ! always 40°C !

 

One other thing : I don't get any CPU temp too high or any other alert ! No good !

iLO Overview

System ROM P72 07/01/2015 System ROM Date

07/01/2015

iLO Overview
iLO Firmware Version 2.50 Sep 23 2016
4 REPLIES 4
VBO
Frequent Advisor

Re: HP ML350 Gen8 3D Sea map sensor - CPU temp BUG !!!

Hello,

I confirm this bug was in HP ILO 2.50 and 2.55B too.

I upgraded yesterday another HP ML350P gen8 from 1.6 to 2.55(B) and now the CPU temp was always 40°C

I have some DL360P and the CPU temps was right with 2.55(B).  Apparently specific to ML350.

 

HP Staff : Please fix this bug. :)

VBO
Frequent Advisor

Re: HP ML350 Gen8 3D Sea map sensor - CPU temp BUG !!! (fixed at 40°C or 104F)

Dear all,

 

I recently upgraded us ML350p Gen8, DL360e Gen8, DL360p Gen8, ML110 Gen8 and Microserver Gen8 to ILO 2.61 (august 2018).

The Bug of CPU temperature 40°C was still present and on all HP Proliant Gen8 servers.

Best Regards

Vincent


@HP Team  :  Is possible to create an issue about this bug ???

_r00t_
Advisor

Re: HP ML350 Gen8 3D Sea map sensor - CPU temp BUG !!! (fixed at 40°C or 104F)

I have the same problem in a DL380p Gen8.

Just upgraded to 2.72 firmware and nothing changed.

I have another DL380p Gen8. with 2.02 firmware and the temp is working ok.

Unfortunately there is no way to roll back the firmware version, or it is?

_r00t_
Advisor

Re: HP ML350 Gen8 3D Sea map sensor - CPU temp BUG !!! (fixed at 40°C or 104F)

Just updated the system BIOS to Version 2018.05.21 Rev. A and still cpu temp fixed to 40C

This is totally annoying because when the CPUs are 100% busy, the temperature goes up to 93C, which is below the manufacturer recommended temp.

I cannot believe a server from 2015 does not correctly control its own temperature...