ProLiant Servers (ML,DL,SL)
1748169 Members
3826 Online
108758 Solutions
New Discussion

HP proliant DL 380 G4

 
Austine Ehimare
New Member

HP proliant DL 380 G4

I bought a HP 300GB Hard Drive for my office server. After the installation the system fail to boot from C drive. I have checked the configuration but nothing has changed. Kindly advise on what to do next.

1 REPLY 1
Greybeard
Esteemed Contributor

Re: HP proliant DL 380 G4

could you please supply a bit more information. Was the 300gb used to replace an existing drive, do you have RAID what other disks are installed etc? My first action would be to shut down and remove all other drives, go to the RBSU for the RAID controller and check the drive firmware revision, or boot a smart start disk and use ACU.
_________________________________________________
How to assign points on this new forum? Click the Kudos Star!