HPE Community
ProLiant Servers (ML,DL,SL)
1752808 Members
5860 Online
108789 Solutions
New Discussion

Re: HP ProLiant DL320 G5p Fan Solution Not Sufficient

 
Dutra2314
Occasional Visitor

‎12-12-2017 04:10 AM

‎12-12-2017 04:10 AM

HP ProLiant DL320 G5p Fan Solution Not Sufficient

 
Good morning, recently I had a problem with my HP ProLiant DL320 G5p server, I was using it normally when I suddenly turned it off and did not want to call anymore, and every time I try to connect it it appears the following message:
"1611-Fan 4 Failure"
"Fan Solution Not Sufficient"
"Critical Failure detected - System shutting down in 4 Seconds!"
He says that Fan number 4 is faulty but, I do not own Fan number 4, he came with 3 Fan's only.
I hope you can help me with my problem.
 
 
 
0 Kudos
Reply
1 REPLY 1
Suman_1978
HPE Pro

‎12-12-2017 08:27 PM

‎12-12-2017 08:27 PM

Re: HP ProLiant DL320 G5p Fan Solution Not Sufficient

Hi,

Was there any hardware or firmware changes done to this server recently?

Clear NVRAM from the dip switch or swap the fan from slot 3 into 4 and see if the error disappears.

Thank You!
I am a HPE employee.

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers


I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.