Hp proliant ml150 g6 gives out bmc crash

[JarcoNL]

My ml150 g6 wont boot and gives a out warning saying the sytem bmc gernic f/w crashed bmc is in recover

what can i do to fix it it worked great in the past

[KK]

Hi,

If the system is installed with LO100 board, please upgrade the firmware for it.

The download is available at https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_c77431f956cd43abac1d982a18.

Regards,

KK

[JarcoNL]

Thanks for your replay i'm kind of idiot how do i install it

do i just put it onto a usb flash drive and insert it into my server?

[KK]

Hi,

Once you download the package, run the installer on Windows System.

It will extract to default folder or one can provide another location.

It will open a webpage in browser. .

Attach an USB Thumb drive to your system and select HP USB Key Setup Creation Utility and Launch it.

It will format the USB Thumb drive and will install the necessary files to it. Follow the instructions.

Once the USB is complete, attach it to the server and boot the server from the USB key.

The firmware will be deployed for LO100 on the system.

Regards,

KK

[JarcoNL]

Thanks for the reply

if i follow the steps i'm at the usb key creation it gives me a device media is wire-protected whil the usb is empty

[JarcoNL]

So i formated the usb to ntfs and it got it working and now my server saud Command or filename not recognized

[KK]

Hi,

I would request you to log a case with HPE and we will help you on it. 

Regards,

KK