ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: HP Proliant ML310e wont start properly and make continuous beeps

 
SOLVED
Go to solution
Highlighted
Occasional Advisor

Re: HP Proliant ML310e wont start properly and make continuous beeps

Hi again! 

Sorry for the late reply, i haven't had the time lately. The thing is my brother is in the interest of upgrading his memory atleast. 

I found the quikspecs along with a photo of the id-sticker on top of the tower.

I'll upload 3 pics

I really appreciate the help so far, I'm kinda new at this. I have 1 question though! Am I restricted to using a specific type of DIMM altogether?



 

Highlighted
Honored Contributor

Re: HP Proliant ML310e wont start properly and make continuous beeps

Check the HP ProLiant ML310e Gen8 (v1, not the v2) QuickSpecs document you already downloaded exactly at page 32, 33 and 34: there you will be able to find all RAM SKU part numbers supported by it.

Notice how the Intel i3 CPU based versions (i3-3240 and i3-3220) support DDR3 RAM bandwidths of 1066, 1333 and 1600 MHz and you can install a grand total of 32 GB since it supports up to four 8 GB Unbuffered DIMMs (CAS-11 or CAS-9 Low Voltage).

Hope this help you (and your brother!).

I'm not an HPE Employee
Kudos and Accepted Solution banner
Highlighted
Occasional Advisor

Re: HP Proliant ML310e wont start properly and make continuous beeps

Finally, yet again i'm sorry for the late reply. My brother finally got his hands on some new RAM yesterday and it's working now, after the replacement of the DIMMS the server would go through all initialization processes and iLO 4 whithout any errors whatsoever. Thank you all so much for your help!
Highlighted
New Member

Re: HP Proliant ML310e wont start properly and make continuous beeps

I solve it cleaning the RAM conections with my hand.