ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: HPACUCLI: physicaldrive not supported message

 
Highlighted
New Member

HPACUCLI: physicaldrive not supported message

Recently one of the drive is having problem, and we have replace the faulty harddisk. But the engineer plug out 2 harddisks at the same time and cause the rebuilding process to fail. we have to rebuild the server and install the monitoring script. Now we are getting this message when querying on the PD. What does this mean and how to solve it?

=> ctrl slot=0 pd all show status

physicaldrive 2:0 (port 2:id 0, 146.8 GB): Not Supported
physicaldrive 2:1 (port 2:id 1, 146.8 GB): Not Supported
physicaldrive 2:2 (port 2:id 2, 146.8 GB): Not Supported
physicaldrive 2:3 (port 2:id 3, 146.8 GB): Not Supported
physicaldrive 2:4 (port 2:id 4, 146.8 GB): Not Supported
physicaldrive 2:5 (port 2:id 5, 146.8 GB): Not Supported
3 REPLIES 3
Highlighted
Honored Contributor

Re: HPACUCLI: physicaldrive not supported message

hi

would you mind posting

ACU version?
OS?
post the ADU report here
HDDs? SAS / SCSI / SATA
server model
Didn't your momma teach you to say thanks!
Highlighted
New Member

Re: HPACUCLI: physicaldrive not supported message

[root@server root]# uname -r
2.4.21-21cpsmp

[root@server root]# hpacucli
HP Array Configuration Utility CLI 8.10-2.0

physicaldrive 2:1
SCSI Bus: 2
SCSI ID: 1
Status: Not Supported
Drive Type: Data Drive
Interface Type: Unknown
Size: 146.8 GB
Firmware Revision: HPB4
Model: COMPAQ BD1468A4C5

ADU report --> cannot afford to reboot the server.
Highlighted
New Member

Re: HPACUCLI: physicaldrive not supported message

System : ProLiant DL380 G4