ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE Dignostic util gets systemdiags.efi.sig file not found

 
Highlighted
Occasional Advisor

HPE Dignostic util gets systemdiags.efi.sig file not found

I have installed Intelligent provisioning 3.46 (latest ver) and after that when I try to run the diagnostic util I get another error, SystemDiags.efi.sig not found. 

I have tried to turn off the secure boot but still same failure, I have also updated the server to the latest spp 2020.03.2 but still same failure, SystemDiags.efi.sig not found.

Is it possible to put the sig file manually to the boot, where can I get the sig file from?

6 REPLIES 6
Highlighted
HPE Pro

Re: HPE Dignostic util gets systemdiags.efi.sig file not found

Greetings!

Was it working fine before installing IP version 3.46?

The .sig file that you have referred to is part of IP. Have you tried downgrading IP or re-installing IP?

 

I am an HPE employee
Accept or Kudo
Highlighted
Occasional Advisor

Re: HPE Dignostic util gets systemdiags.efi.sig file not found

Yes it was working before installing 3.46

I downloaded the iso for  3.46 and tried to search for the sig-file after mounting the iso, couldent find it on older IR iso's either. 
Maybe its some secure boot feature that have been activated for the latest IR version but HP forgot to add the sig-file? 

Highlighted
HPE Pro

Re: HPE Dignostic util gets systemdiags.efi.sig file not found

Greetings!

I have checked in one of our lab servers and see the same issue. 

 However you can run hardware validation tool from Intelligent Provioning and then run extensive test on the hardware. You may also set number of loops to run the test.

I am an HPE employee
Accept or Kudo
Highlighted
Occasional Advisor

Re: HPE Dignostic util gets systemdiags.efi.sig file not found

Greetings!
Thanks for checking. I have run the embeded programs and that way it works.
The only problem now is that I get: : Hard Drive Long DST check Warning, (see attached pic).
What does this mean?

The server has been problematic for a long time, (it hangs sporadic once a month)
Err.png 

Highlighted
HPE Pro

Re: HPE Dignostic util gets systemdiags.efi.sig file not found

Greetings!

There could be some underlying issue with the hard drive.

To get the drives and the overall server health checked, please generate the AHS logs (methods mentioned on link below) and log a support ticket to get it analyzed.

https://techlibrary.hpe.com/docs/iss/DL360pGen8/tsg/advanced/Content/150999.htm 

I am an HPE employee
Accept or Kudo
Highlighted
Occasional Advisor

Re: HPE Dignostic util gets systemdiags.efi.sig file not found

Thanks, I will do that