ProLiant Servers (ML,DL,SL)
1748198 Members
2656 Online
108759 Solutions
New Discussion юеВ

HPE DL380p GEN8 iLO4 Self Test Error

 
Torsten.
Acclaimed Contributor

Re: HPE DL380p GEN8 iLO4 Self Test Error

Next ILO-4 version 2.60 will have a button in the web interface to force the NAND format ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Eggman_2112
Valued Contributor

Re: HPE DL380p GEN8 iLO4 Self Test Error

Now thats good progress! I can't wait! Thanks for giving the update...

Thanks for your time and have a great day!
Roberto
DblDThe3rd
Occasional Visitor

Re: HPE DL380p GEN8 iLO4 Self Test Error

how where?

I got this pesky problem and I cant see where to force NAND format 

running iLO4 2.60

 

Torsten.
Acclaimed Contributor

Re: HPE DL380p GEN8 iLO4 Self Test Error

see advisory

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00048622en_us


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
SWWIT
Occasional Visitor

Re: HPE DL380p GEN8 iLO4 Self Test Error

Hi. I try to use the Powershell Script.

How to determine the Bay Number of the Embedded Flash/SD-CARD?

Help would be appreciated.

Torsten.
Acclaimed Contributor

Re: HPE DL380p GEN8 iLO4 Self Test Error

no bay.
this is a chip on the systemboard.
ILO owns it, the OS cannot see it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Zakour
Occasional Advisor

Re: HPE DL380p GEN8 iLO4 Self Test Error

Hi

You said in your reply that :  " When ILO finished coming up (no server reboot required) "

How about this step please ?

2.  Do a power-off/unplug reset

Mohamed ZAKOUR
https://www.linkedin.com/in/mzakour/
Torsten.
Acclaimed Contributor

Re: HPE DL380p GEN8 iLO4 Self Test Error

Unless you are running your OS from the internal SD card, an ILO reboot does not affect the running system.

 

However, meanwhile ILO version 2.60/2.61 can help you with NAND format.

Upgrade ILO to 2.61.

 

Login and check ILO health. If there is a problem, click on ILO health and select "Format".

 

After doing this, pull the power plugs (shut down your OS before!).

 

Then check ILO health again.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Zakour
Occasional Advisor

Re: HPE DL380p GEN8 iLO4 Self Test Error

Hi

If my understanding is well, I have to proceed as follow :

1- Upgrade iLo Firmware to version 2.61 (Already done)

2- Power-Off the server, remove the power cables for a couple of seconds then Power-On again the server

3- Format NAND

Am I right or missed some steps ?

Does Step 2 mandatory or Optional ?

   

Mohamed ZAKOUR
https://www.linkedin.com/in/mzakour/
srinivas772
Occasional Visitor

Re: HPE DL380p GEN8 iLO4 Self Test Error

Hi,

I got the solution from this site for below error message. 

Embedded Flash/SD-CARD : Controller firmware revision 2.10.00 NAND read failure 

https://support.hpe.com/hpsc/doc/public/display?docId=a00048622en_us

Followed Steps from: Steps to perform a NAND format via the iLO GUI