ILO 5 Alert problem with sender mail adress

[Michael11]

@Hi, here is my problem: I'm using ILO5 Firmware 1.10 and I'm trying since ours to configure alert mail with my Exchange. ILO 5 is sending the alert mail, but my exchange could not accept ist, because the sender-mailadress (generated by the ILO) is in a wrong format like testman.@abc.de. I got that information from the log-file of my exchange-server. There's no way to delete the "." in front of the @. I tried different host-names an sender domains, but it's still the same problem. 

Thanks for your help!

[AlessandroCH]

Hi,

you can solve the problem disabling the check box: Use DHCPv6 Supplied Domain Name and inserting the domain name in: iLO Dedicated Network Port -  Network General Settings. The sender email address is composed by HOSTNAME.DOMAINNAME@YOURDOMAIN

[molnart]

i have the same problem. i want to use an email address in the form of mail@mydomain.com, but even i remove the domainname i get the "." in the address, like mail.@mydomain.com

[Sanilk]

Hi  Michael ,

  Kindly refer the following HPE document to Configuring iLO Network Settings ;

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00026106en_us

Also you can refer the following documnet to setup ILO alert email;

Note : 

The below link is not  from HPE , it ia a 3rd party link ;

https://www.informaticar.net/how-to-setup-hp-ilo-alertmail/