ProLiant Servers (ML,DL,SL)
1748180 Members
3935 Online
108759 Solutions
New Discussion

Re: ILO connection constantly shutting down

 
richsmif76
Occasional Advisor

ILO connection constantly shutting down

I am running ilo 2.55, it seems if the connection is open for a while (because im installing windows), it says Ilo connection is been shutdown.

This is highly annoying as it disconnects the ISO file and breaks the installation.  Dumb microsoft dont allow you to retry the installation and carry on, it just says fails.

I have set idle time to infinite in the settings.  

How do i, or what is causing ILO connections to shutdown?

4 REPLIES 4
richsmif76
Occasional Advisor

Re: ILO connection constantly shutting down

seems if you only have 1 session open to 1 server, it stays up.  multipul servers all pointing at the same iso file causes the problem.  normally not a problem but when you have mulitpul servers to rebuild its not good.

this is a bug!  I have 4 servers, all pointing at the same ISO file.

parnassus
Honored Contributor

Re: ILO connection constantly shutting down

Hi!

To be clear your statement should be completed with the word concurrently (that's to say: not only multiple connections but multiple concurrent connections):

I have 4 servers, all pointing at the same ISO file concurrently.

Maybe this is a restriction of iLO (or maybe not)...


I'm not an HPE Employee
Kudos and Accepted Solution banner
Jimmy Vance
HPE Pro

Re: ILO connection constantly shutting down


@richsmif76 wrote:

seems if you only have 1 session open to 1 server, it stays up.  multipul servers all pointing at the same iso file causes the problem.  normally not a problem but when you have mulitpul servers to rebuild its not good.

this is a bug!  I have 4 servers, all pointing at the same ISO file.


Can you provide more details?  Is the ISO file on a web server, or your local system? If the later your local system may just not be able to handle the the I/O of 4 concurrent connections trying to transfer the ISO contents 

No support by private messages. Please ask the forum! 
Torsten.
Acclaimed Contributor

Re: ILO connection constantly shutting down

A problem may cause ILO to reboot and interrupt virtual media.

go to ILOs diagnostics page and check the status. have a look into the ILO logs too.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!