ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: iLO4 update failed - Checking HP Secure Digital Signatur

 
SOLVED
Go to solution
Highlighted
Advisor

Re: iLO4 update failed - Checking HP Secure Digital Signatur

Welp, I'm at my wits end with this server. We tried power draining it again fully, then booted it up clean - verified that the iLO was in a normal state.

This time I pushed the bin file for intermediate version 2.10, up to the ESXi datastore directly, so the file was local. I then tried to do the firmware update via hponcfg using the Update_Firmware.xml script. While the script executed, it did eventually time out, because the iLO went right back to the "Checking HP Secure Digital Signature" status in the GUI, and it's once again stuck at 1% flash progress! This is the same thing that's happened every time we try and update this iLO, no matter the version or update method.

I think the iLO itself needs to be replaced. It's a ProLiant DL360p Gen8 - the iLO firwmare itself is on the motherboard, correct? Would this require a new motherboard to resolve?