ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Innovation Engine Installation

 
SOLVED
Go to solution
Highlighted
Occasional Advisor

Innovation Engine Installation

Hi Friends,

installation Instructions for Installing IE in G10 are written:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

However in ILO-5 Userguide are written:
These firmware types require that you power off the server before installation. The changes take effect after you power on the server. Power off the server and wait 30 seconds if you will update...

What is right?

Jiri

 

 

2 REPLIES 2
Highlighted
Acclaimed Contributor
Solution

Re: Innovation Engine Installation

Different file formats, different instructions.

There is (maybe was) a *.bin format for install via ILO in powered off status.

Nowadays there is probably only the *.rpm format for use with SPP or in Linux directly - off course while running.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_13c53b2245aa41cd85f32655aa#tab2

 

here is the old *REMOVED* version with a *bin file:

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-8340068d1b734d5ea9a07a29a9#tab3

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Occasional Advisor

Re: Innovation Engine Installation

Hallo Torsten,

thank you for the quick answer

Jiri