HPE Community
ProLiant Servers (ML,DL,SL)
1752590 Members
3401 Online
108788 Solutions
New Discussion

Re: Install a second riser board in ProLiant DL 380 G7

 
marcelovvm
Occasional Contributor

‎02-24-2020 12:01 PM

‎02-24-2020 12:01 PM

Install a second riser board in ProLiant DL 380 G7

Hi everyone, I have a question about installing a second riser board on an HP Proliant DL 380 G7 server. I already have a riser board installed, but I noticed that there is another connector for a second riser board. Can I have two riser boards installed?

Live long and prosper

Marcelo Magalhães 

Live long and prosper,
Marcelo Magalhães
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎02-24-2020 12:08 PM

‎02-24-2020 12:08 PM

Re: Install a second riser board in ProLiant DL 380 G7

Yes, there are several options for a second riser:

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c04199811


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.