1827379 Members
4063 Online
109963 Solutions
New Discussion

Install issues

 
Ayman Altounji
Valued Contributor

Install issues

Hi all,
problems with win2k adv.server install. The initial setup goes thru fine. The files are copied to instll folder etc.. The system then asks to reboot. Here is where the problem is ...

It never continues further with the install. The boot order I have is Floppy, CD Drive, then C:

Any suggestions,

Thanks a lot
1 REPLY 1
Ayman Altounji
Valued Contributor

Re: Install issues

Hi, with the info given and usually these setup problems are hard to diagnose. But 1st if you have more than a gig of memory I sugg to bring it down lower than a gig for the installation portion. Is their any 3rd party hardware, is the memory Compaq, Did you try assisted and manual running the erase utility prior. Also system rom and array controller firware might also need to be upgraded as well. Hope this will help.