Migrate Disk RAID 5 from ML350 G10 to a ML350 G9

[G-Mora]

HI, I need your help with the following:

I have an HP Proliant ML350 G10 with motherboard failure, with a raid 5 (Principal server)
I also have an HP Proliant ML350 G9 in reserve.

I want to know if there is any way to migrate the disks from the ML350 G10 to the ML350 G9 and be able to recover the data

[Jimmy Vance]

---

@G-Mora wrote:

HI, I need your help with the following:

I have an HP Proliant ML350 G10 with motherboard failure, with a raid 5 (Principal server)
I also have an HP Proliant ML350 G9 in reserve.

I want to know if there is any way to migrate the disks from the ML350 G10 to the ML350 G9 and be able to recover the data

---

It's pretty easy to move an array from older generation to a newer generation server, but going the other way may not work. If the Gen9 server has the latest firmware updates for the Smart Array there is a chance the Gen9 server will recognise the Gen10 array, but it isn't a scenario that is tested. There could be features in newer controller that the Gen9 controller may not be able to handle. If you don't have a good backup, I'd wait for the replacmenet systemboard