ML 350 G6 does not power on

[lmgf]

Hi,

Monday morning we found our server ML 350 G6 down, 

The power supply seems to be working, because it was tested on another server and it started ok

When we plug the power supply two things happens,

the power supply fan works OK,

and the UID led blue light on the rear panel turn on a fraction of second and then turn off again,  and that's all , the server is down, no led status, no fan spinning, nothing else

The server is connected to an Online UPS together with others servers , we don't see any problem with the other servers or the online UPS

What can I do to be sure that the system board should be replaced ?,  

Kind Regards

Lazaro

[Suman_1978]

Hi,

Start with the basics.

Remove any additional hardware that are not required for POST, like pci cards, additional RAM/Processor.

Disconnect any external storage, tapes, usb etc.

Refer to this doc: https://support.hpe.com/hpesc/public/docDisplay?docId=c01704616&docLocale=en_US

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

[Moderator edit: Removed the broken links. Please refer to https://support.hpe.com/]