ML110-G5 don't startup anymore

[Boyz_PC]

2 of the 4 ML110-G5 stopt starting up.

If i put the power on, the fans starts and that's it.
Bought a refurbished board and stil the same problem.

The Powen on led is green, the standby led is green and the hartbeat led is blinking green.

What is the problem??????

CPU X3210 / 4x 2Gbyte Dimm / 2x 1gbyte HDD in hardware raid1/DVD-rom

[Tech_Aniket]

Hello Boyz_PC,

Thank you for posting your query.

Please refer to the LED indicator for the ML110 G5 server - 

https://support.hpe.com/hpesc/public/docDisplay?docId=c01455172&docLocale=en_US

I would suggest to Power ON the server with minimum configuration and check the status.

Check for any Amber LED on the system board.

Try different DIMM combination, Isolate the issue with VGA port.

Thank you

Regards,

Aniket Chauhan

[Boyz_PC]

the 1ste ML110G5 serverboard has 3 leds green on(power on, standby on, heartbeat), no sound beeps

the 2de ML110G5 serverboard has 2 leds green on(stanby on, heartbeat on) , no sound beeps

I think that the motherboard is gone!

Tried every possible thing allready, but it's me to expensive to change the boards.

[Tech_Aniket · Accepted solution]

Hello Boyz_PC,

I think yes the Motherboard could be the faulty component here.

Just another suggestion would be to swap the parts from a spare working setup one at a time and check if it helps to isolate the issue.

**Please be careful with CPU pins and CPU slot on the board. Also make sure to have a valid data backup at any given point of time.

(Ignore if already tested)

Also if server is under Warranty, suggest you to log a ticket with HPE support for further help for part replacement.

Thank you

Aniket Chauhan