nvme EX900 1TB AND KIT 878783-B21 DL360

[Pau_Rubio]

Hi, I need a fast hard drive but the information is not critical. So I had thought about placing an EX900 with the M2 KIT.
I would only have that disk so that it would be bootable, do you know if the EX900 could be compatible with the KIT M2 "pn: 878783-B21"? or is it only compatible with the 875492-B21?
Thank you so much.

PD: If it is not recommended, for price I would place 3 240gb disks in raid 0.

EX900

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00019120es_es-1.pdf

878783-B21

https://www.hpe.com/dk/en/product-catalog/servers/server-solid-state-drives/pip.hpe-universal-sata-hhhl-3yr-wty-mdot2-kit.1010137486.html

875492-B21

https://www.hpe.com/dk/en/product-catalog/servers/server-solid-state-drives/pip.hpe-960gb-sata-6g-mixed-use-mdot2-2280-3yr-wty-digitally-signed-firmware-ssd.1010129284.html

[Ifthakar_Ahmed]

Hi Pau_Rubio,

I would request you to please refer the below quickspecs, page -54

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00008159enw

Internal Dual M.2 Kit
HPE Universal SATA HHHL 3yr Wty M.2 Kit 878783-B21
NOTE: The Universal SATA M.2 Kit above will require a PCIe slot and support up to two of the same M.2 cards
below.
HPE DL360 Gen10 SATA M.2 2280 Riser Kit 867978-B21
NOTE: The DL360 SATA M.2 Riser Kit above is part of the Primary Riser so it will not take up a PCIe slot and
will support up to two of the same M.2 cards below.

Read Intensive - M.2 - Solid State Drives (2280 type)
HPE 960GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD 875500-B21
HPE 480GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD 875498-B21
Mixed Use - M.2 - Solid State Drives (2280 type)
HPE 960GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD 875492-B21
HPE 480GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD 875490-B21
HPE 240GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD 875488-B21

Regards,

Ifthakar