[POST1783] ML350 GEN5

[calejandrop]

Hi guys,

In the work we have a ML350 GEN5 server, but we've got the post message 1783 Slot 0 Drive Array Controller Failure

Does somebody can help us? or explain about this message?

Thanks

[TVVJ]

Hi,

Update the firmware of the controller and check if the issue is resolved. If the issue persists, and there is a cache module installed, then reseat it, if not swap with known working module. If the issue still persists, then remove the cache module and check if the issue is resolved. If so, then replace the cache module. If the issue persists, then the system board may need replacement as it is embedded on the system board.

Hope this helps!

Regards,

Vijayasarathy