ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Pre Failure warranty

 
Highlighted
Occasional Advisor

Pre Failure warranty

Hi,

 

On pre Gen 10 HPE Servers (e.g. DL380) it was possible to see if a hard drive was in a pre-failure state using SMH and then you could request a replacement from HP and replace the drive before it fails. 

 

How can you see if a drive is in a pre failure state on Gen 10 Servers? Does a prefailure get notified in the hard disk status in iLo now that SMH is not available on Gen 10 Server? Is there anywhere else to see HDD pre failures?

Thanks

3 REPLIES 3
Acclaimed Contributor

Re: Pre Failure warranty

Not sure about ILO, but the SSA will show you.

I guess ILO will show it too.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Occasional Advisor

Re: Pre Failure warranty

Thanks for your help. Where in SSA do you see pre-failure info?

 

Thanks

 

Highlighted
Acclaimed Contributor

Re: Pre Failure warranty

Go to physical view.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!