Proliant DL 385p G8 : no video output but remote console OK

[banach]

Hello all,

The title almost says it all : on my DL 385p G8 there is no video output (front or back).

However everything else seems to be fine. All leds are green, iLo (v2.70) says everything is ok, and I can see all post messages in a remote console, the system boots on a USB key correctly.

I reduced the number of DIMMS to 1 per CPU.

I also did a system reset as described here.

But still no video output

Any help welcome !

The config :

- ProLiant DL385p Gen8

- 2x AMD Opteron 6380

- 2x 4Gb of RAM

[Jimmy Vance]

You sure the monitor is working? Remote console gets the signal from the VGA output