Proliant DL120 G7 and Windows 2016 red disk lights

[Dhac_75]

Hi All, 

I have a proliant DL120 G7 with two arrays. Array 1 is 2 x 1TB drives and Array 2 is 2 x 4TB drives. The raid card is the B110i

All the drives and arrays are seen fine in the Array bios setup and all disk lights green during boot. 

As soon as windows starts to loads the Array 2 disk lights go red and cant be seen in windows 2016. 

Any ideas?

Thanks

[Suman_1978]

Hi,

Please check if your server is compatible with Windows 2016.
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/windows.aspx

Consider updating any firmware available for your server and hard drives.
https://support.hpe.com/hpesc/public/home/driverHome?sp4ts.oid=5075938

Thank You!
I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //

[RicardoFP]

The Smart Array B110i controller is not compatible with drives larger than 2TB in RAID.

It's a product limitation.

This controller predates the introduction of 4TB disks by a bit.

Try to upgrade the last firmware of B110i, maybe they have solved it.