ProLiant DL360 Gen10 IMPI SDR error on Centos6

[RCostin]

Hello

I have a customer which develops critical applications for aeronautic industry and because of the certifications, can not switch to centos 7 until may 2019 (estimated). 

During the regular process, the servers must be monitored over ipmi. On Gen10 with CentOS 6 we hit an error: impi can not see the power supplies.

On CentOS 6 - with kernel 2.6.32-754, from distro, or 4.8.11-1, recompiled, the reading is below

Power Supply 1 | Not Readable | ns
PS 1 Output    | no reading   | ns
Power Supply 2 | Not Readable | ns
PS 2 Output    | no reading   | ns
Power Meter    | 60 Watts     | ok

IPMI modules loaded: impi_ssif, impi_si, impi_devintf, impi_msghandler and i2c_core

On CentOS 7 - with kernel 3.10.0-862 (from distro):

Power Supply 1 | 0x00         | ok
PS 1 Output    | 60 Watts     | ok
Power Supply 2 | 0x00         | ok
PS 2 Output    | disabled     | ns
Power Meter    | 60 Watts     | ok

IPMI modules loaded: impi_ssif, impi_si, impi_devintf, impi_msghandler and i2c_core

Any idea how can I read the power supply status over ipmi ?

Thank you

Costin

[MV3]

HI,

A detailed investigation is required for the issue reported, Kindly log a support case with HPE.

I work For HPE.

[RCostin · Accepted solution]

Hello

I managed to solve the problem: it was in ipmitool issue. I recompiled 1.8.18 and everything is ok.

Thank you