1748089 Members
4936 Online
108758 Solutions
New Discussion

ProLiant DL360p Gen8

 
raskatov
Occasional Contributor

ProLiant DL360p Gen8

RAID is created from 2 SSD disks, on the front ponele there is no indication of HDD activity. Only the RAID sign is lit.

1 REPLY 1
kriM
Advisor

Re: ProLiant DL360p Gen8

Greetings,

DL360p Gen8 with 2 * SSD disks, hard drive NO LED indication.

Just have some clarifications when drive NO LED, but you are able to create the Raid.

Which means - Disk is getting the power and also disk is recognized and Raid creation is successful.

1. DL360p Gen8 Server is already in use for some years now.

2. so I understand, this Server was working fine before?

3. Did you recently add the SSD hard drives or was it working since the installation?

4. Let me know the smart array controller make model on this Server?

5. Are the SSD drives purchased from HPE?

6. What is the make and size of the hard drives?

If posible, provide AHS logs and ADU report from the Server, or open an elevation with HPE support. we need to investigate drive compatibility and the Smart array and cable used.

Thank you,
I am an HPE Employee