ProLiant ML110 G6 BIOS image and drivers

[wookie_73]

Hi

I have installed Windows server 2016 on a ML110 G6.

However there is one device not istalled correctly, ACPI/HPQ000B/0.

I am after the last available BIOS image as I hope an update will help.

Also if there are any drivers out there for 2016 that are better than the standard MS drivers.

Thanks Dave

[smokin901]

hi,

that is

HP ProLiant 100-Series Management Controller

[SumeetK · Accepted solution]

Hello,

Please note that Windows Server 2016 is not supported/recommended on ML110 G6 servers. Windows 2008 R2 was the last supported version.v You may refer to HPE Servers Support & Certification Matrices : 

https://techlibrary.hpe.com/US/EN/enterprise/servers/supportmatrix/index.aspx

Hence you may not find any driver release from HPE.

Regarding ACPI/HPQ000B/0, you may try installing below 

HP ProLiant 100-Series Management Controller Driver for Windows Server 2003/2008 x64 edition

HP ProLiant 100 Series Servers Null Management INF Installer Smart Component for Microsoft Windows Server 2003/2008 x64 edition

[Moderator edit: Updated the broken link. You may also refer to https://support.hpe.com/]

[JeroenKleen]

In addition to SumeetK his good suggestion on the driver.

You could easily try installing the drivers from an previous OS like WS2012R2 however you can't just run the setup as it won't install. You have to extract the driver package manually and then point WS2016 to this driver location and then with a bit of luck it could install it; if not then you could still disable that PCI-device as well.

Best Regards, jeroen

[wookie_73]

Excellent.  Thank you all for you help. Probelm solved with the "HP ProLiant 100-Series Management Controller Driver for Windows Server 20032008 x64 edition" driver.

Had to unpack and install manually.

Cheers