HPE Community
ProLiant Servers (ML,DL,SL)
1753548 Members
5572 Online
108795 Solutions
New Discussion

Proliant ML310e G8 V2 RAID Configuration

 
JuanCaMM
New Member

‎12-10-2014 06:18 AM

‎12-10-2014 06:18 AM

Proliant ML310e G8 V2 RAID Configuration

Dear Sirs,

 

I want to configure a RAID 1+0 in this server with four 2TB disks, but when it is done with the Smart Array, the Windows 2008R2 operating system doesn´t recognize the disks. They are only recognized with AHCI or Legacy but there is no RAID then. Ideally we want a RAID1+0 configuration in this server but optionaly we could work fine with the two disks with no RAID and the others as a mirror disks. Please could you give me some tips I can do to solve this issue. Thanks

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎12-10-2014 06:25 AM - edited ‎12-10-2014 06:38 AM

‎12-10-2014 06:25 AM - edited ‎12-10-2014 06:38 AM

Re: Proliant ML310e G8 V2 RAID Configuration

You need to use the special driver for this dynamic smart array (controller B120i). Consider to install the OS via itelligent provisioning (press F10 during boot).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.