"Integrated Lights Out 2 configuration is temporarily unavailable. (1)"

[david carvalho]

Hello.
After a reboot yesterday I noticed that my DL 380 G6 server took to long to show the POST messages and to boot.
Even more serious was the fact that I got
"Warning - iLO2 not responding - System health monitoring has been disabled"

a few lines later I got
"Integrated Lights Out 2 configuration is temporarily unavailable. (1)"
And in fact it is unavailable.

So after reading a bit, I've found that iLO2 firmware update CP025666.scexe would solve this.
After creating a usb key and copying the file to /compaq/swpackages I boot the USB
and get into the firmware update.
When selecting this option, at the end of the avalable updates I get:

-----------------------------------------------
HP Integrated Lights-Out 2 No supported devices
Installed version: none
Available versions

2.27
1.81

-----------------------------------------------
I can't select any of those upgrades, it's like they're unavailable.
Any ideas please?
Thanks and regards.

[Jimmy Vance]

You may need to remove power to the system so iLO will reset

[david carvalho]

Thanks for the reply.

I'll try that as soon as I can take the server down and I'll post the result.

Regards

David