Riser Card for DL60 Gen9

[Franceskiello]

Hello everybody,

I bought an HPE Ethernet 1Gb 4-port 366T Adapter p/n 811546-B21 as a network expansion for a  DL60 Gen9.

Unfortunately the Primary PCIe riser board connector was alreay used for a Smart Array controller, so I need to buy a riser board to be installed in the Secondary PCIe riser slot and then insert the Ethernet adapted in this board.

I would like to know the correct p/n of a riser board that could fit.

Thanks in advance,

Francesco

[mlasidab · Accepted solution]

Hi Francesco,

if i am not worng, you need to buy PID: 765510-B21HP DL60/120 Gen9 Full Height Half Length PCIe Riser Kit.

Please refer to the following links for more clarification:

DL60 Gen9 Server - Option Parts: https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c04517603#N10CDD

QuickSpecs HPE ProLiant DL60 G9: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04447824.pdf

best regards,