Server health LED flashing Red

[Dark_Force]

My department's HP Tower server has a RED LED flashing light blinking. However it is booting into Windows, but the server fans are running at full speed throughout producing high noise. The LED green light in the PSU is not Glowing. Please help me resolve this problem

[FabioC1]

Hi  Dark_Force  

Please  provide more information about your server.

MLxxxx

Generation xx

Regards

[Dark_Force]

Hi,

It is a Hp Proliant ML server gen 7 or 8.

I don't know more about the model number, Sorry

Thank You

[FabioC1]

Dark_Force , So can you acces the ILO and see more information about error ?

Led Indicator -

ML110 g7 -  https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02790685

ML310e ge8  - https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05067698

[Dark_Force]

It says ILO 4 is not responding. system health monitoring has been disabled

[Torsten.]

i would try now pulling the power plugs for an ILO cold boot.

[Dark_Force]

I tried, No change, @Torsten.

[FabioC1]

 Dark_Forc 

Try to update the firmware and driver of the equipment, because is very old."2013"

Try update the ILO 4

first update driver - https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1009143853&swItemId=MTX_e196fcb67e1941de959751786f&swEnvOid=4184#tab-history

After - Firmware - https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_ed3b2dda5a4542f69ab76e7e17

[Dark_Force]

I downloaded the firmware from HPE and installed it. and rebooted it. now the red LED light doesn't blink initially. but after pressing the power button green light emits in the health monitoring and then red blinking light. then the server powers down and off. Nothing comes in the screen.

I found the server model. It is an HP Proliant ML350e Gen 8 sever