HPE Community
ProLiant Servers (ML,DL,SL)
1751709 Members
5323 Online
108781 Solutions
New Discussion юеВ

Re: USB Key defult Boot? DL380 G9

 
jjackstar
New Member

тАО12-19-2016 12:44 AM

тАО12-19-2016 12:44 AM

USB Key defult Boot? DL380 G9

Ive been setting up a new DL380 G9 and would like to use the internal USB port to run unRAID however I am at a loss when getting it to boot from the USB by defult. Due to the version of unRAID running  a older kernal the USB needs to boot from legacy mode not UEFI. Any ideas or segestions would be much appreciated!

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО12-19-2016 06:50 AM

тАО12-19-2016 06:50 AM

Re: USB Key defult Boot? DL380 G9

So you can set the boot mode to LEGACY using the systems menu.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Jimmy Vance
HPE Pro

тАО12-19-2016 06:55 AM

тАО12-19-2016 06:55 AM

Re: USB Key defult Boot? DL380 G9

Not really dependant on a kernel version, primarily a boot loader limitation.  Go into RBSU (F9 System Utilities) and change the boot mode from UEFI to Legacy BIOS Mode

System Configuration - BIOS/Platform Configuration - Boot Options - Boot Mode 

 

No support by private messages. Please ask the forum! 
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.