ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Add a 136GB HD on a LC2000

 
Highlighted
New Member

Add a 136GB HD on a LC2000

Hi there:

Would like to know possible reasons why can't see in Device Mgr the recently installed drive, do i have to run Ctrl in order to put in online???...just installed FAST and tried running but a msg appears indicating that "no controller was found".

This server is in a remote location and no available tech guy around for the next three weeks.

Txs in advance
FSS
1 REPLY 1
Highlighted
Honored Contributor

Re: Add a 136GB HD on a LC2000

Hola Fernando,

I think you're using the wrong utility. FAST is used if you have a NetRAID-4M controller. If you are getting a prompt to press M at POST, it means there is a different NetRAID controller installed. Try the NetRAID Assistant. You can download it from here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=62572&prodNameId=62573&swEnvOID=226&swLang=13&mode=2&taskId=135&swItem=ns-12645-1

Hope this helps,

Sean T. Craig Sr. C.E.T., M.C.P.

P.S. Please encourage participation in the forums by assigning points to rate the responses to your questions.

I am King...of my apartment.