ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

BL480C with NC364m

 
Highlighted
New Member

BL480C with NC364m

I have a BL480c in a C7000 enclosure. Added a NC364m into mezz slot 1 and have Cisco 3020 in interconnects 3 and 4. Within the bios the nics show up as just "Ethernet Network Controller" So it looks like the server doesn't recognize what they are completely. Is there an additional setup step? I have the lastest firmware flash on the server and even reflashed it.